If you have a fire or water emergency, please call us now at (973) 383-2024

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

What Happens After a Flood: Mold Remediation

9/2/2021 (Permalink)

Have you ever wondered what happens when a mold removal specialist gets called to a mold-damaged facility? The Institute of Inspection, Cleaning and Restoration Certification (IICRC) shares five steps a mold removal specialist takes when conducting mold remediation.

“Many people aren’t aware of the dangers, nor the difficulty level of removing mold from a facility,” said IICRC Chairman Tony Wheelwright. “Mold remediation is a potentially hazardous process that should only be undertaken by a certified professional.”

Five steps that each mold-removal specialist takes when conducting mold remediation includes:

  1. Determine the degree of contamination.  The first step for a mold remediation specialist may be to bring in an Indoor Environmental Professional (IEP) or Certified Industrial Hygienist (CIH) to determine the extent of the mold damage and test for contamination within the facility. Because mold spores and other microscopic contaminants can travel easily throughout a building, the IEP/CIH may collect and analyze samples from affected as well as unaffected areas of the building. Once the IEP/CIH has finished the inspection they will develop a remediation plan for the mold removal specialist, such as SERVPRO of Northern Sussex County, with steps to return the home to its preloss condition (Condition 1).  Learn more about our Mold Remediation process by visiting our website here.
  2. Set up and verify containment. To make sure mold contamination does not spread to other areas of a facility, the SERVPRO will set up containment by creating isolation barriers. Once the barriers are set up, SERVPRO will need to verify the containment with a lower partial pressure differential (negative pressure) to ensure there is no air leakage between containment zones. Exit chambers would then be used to serve as a transition between the containment and the unaffected area of the building. Once the containment is verified and the correct amount of pressure is achieved, the removal process can begin.
  3. Remove unsalvageable materials. Porous materials and items that cannot be restored or cleaned effectively must be carefully discarded. Unsalvageable items include but are not limited to drywall, insulation and other items with visible mold growth. It is important for the SERVPROspecialist to wear the appropriate personal protective equipment which may include a full face respirator equipped with a P100/OV cartridge, disposable coveralls and nitrite gloves.
  4. Clean surfaces with a high-attention to detail. SERVPRO will likely begin the cleaning process by thoroughly vacuuming the contaminated areas using a HEPA vacuum with a high-efficiency filter to catch mold spores. We will then begin a detailed cleaning process involving mold removal tools such as a HEPA filtered sander, followed by the damp wiping of surfaces with an effective cleaning solution.
  5. Verify remediation. Once cleaning is complete, the IEP/CIH will return to verify the remediation was successful. The area must be returned to the dry standard and should be visually dust free with no malodors. In addition an IEP/CIH may perform surface or air sampling as part of the verification that the area is back to normal fungal ecology (Condition 1).

“Mold remediation requires mold removal specialists to perform techniques that promote source removal rather than relying on chemicals, paints and coatings as a replacement,” said Rachel Adams, President of Indoor Environmental Management, Inc. “Understanding and managing air flow is also critical to the success of a mold remediation project. Working with qualified IEP can also help to reduce the liability for the technician as well as provide a final determination if the remediation was successful.”

For more information on mold remediation or the latest in mold remediation standards, visit the IICRC

Contact us at 973-383-2024 if you have a service need or click here to visit our website to learn more about SERVPRO of Northern Sussex County's System Services. 

Like Us on Facebook or Follow us on Twitter, or Instagram and follow the tips, tricks and advice we share with our community.

Other News

View Recent Posts